Auto Maintenance Reminder¶
Featuring with an automatic maintenance reminder, the Printer supports detecting the operating time and usage frequency of the device and its parts, and timely reminds the user to perform maintenance, cleaning or replacement of parts if needed, ensuring a good printing experience.
Note
The Z axis needs regular lubrication to ensure smooth movement and reduce noise, ensuring stable printing effect.
When the Z axis has been running for more than one year, a window will pop up and provide a prompt, as shown in the right figure.
Tap Go to scan the QR code to view specific video tutorials; tap OK to close the pop-up window, and the notification can still be viewed in the message board on the homepage.
Note
After the light panel becomes dirty, it will lead to a decrease in the light power projected onto the screen, resulting in incomplete curing, and ultimately causing problems such as model dropping and delamination.
When the device has been in operation for more than one year, a window will pop up and provide a prompt, as shown in the right figure.
Tap Go to scan the QR code to view specific video tutorials; tap OK to close the pop-up window, and the notification can still be viewed in the message board on the homepage.
Note
After the fan filter becomes dirty, it will lead to poor heat dissipation of the device, which will in turn affect the lifespan of the light panel and reduce the printing stability.
When the device has been in operation for more than half a year, a window will pop up and provide a prompt, as shown in the right figure.
Tap Go to scan the QR code to view specific video tutorials; tap OK to close the pop-up window, and the notification can still be viewed in the message board on the homepage.
Note
The film needs to be replaced after reaching its lifespan, so as to ensure printing effect.
When the number of printed layers of the resin tank exceeds the specified value, a message will appear in the message board on the homepage: The resin tank has reached the maximum number of printed layers, please replace the resin tank to ensure stable printing effect.