Skip to content

Clean Optical Components

To ensure the print quality, it is suggested that clean the LCD screen and other optical components every two weeks to prevent problems such as model detachment and rough surface.

Please follow the instructions below to clean optical components.

Lift the fixation handle with one hand, use the other hand to hold the platform horizontally and slide it away from the rail, and then place it on the side of the printer.

① Slide the resin tank out of the printer.

② Empty the liquid resin into the original container and place resin tank upside-down on a clean, flat surface.

Loosen 4 screws on the back cover for taking it off.

  • Clean LED panels: Use a clean wiping cloth to remove dust on the surface of the LED panels gently.

  • Clean the LCD screen: Use the cloth dipped with a small amount of clean liquid ethanol to polish the underside and top surfaces of the LCD screen gently until it is completely transparent.

After cleaning, lay the optical components in a cool ventilated place for drying them completely before the next use.