Cure the Model

It is recommended that you perform secondary curing on the printed model twice after cleaning, to make it more stable and easier to store. The post-cured model is also safer as it does not irritate the skin.
Besides, its various properties such as smoothness and hardness are superior to those of the model before the secondary curing.

For more specific principle, please expand the "Note" section below.

Note

During the operation of the Curing Box (Fabware), the specific wave of UV light will cure the photosensitive resin in order to cure the printed resin models twice.

Please follow the instructions below to cure the printed model.

1    Place the model      >2    Cure the model

Wear disposable gloves and open the chamber door of the curing box, and place the cleaned model on the center of the acrylic turntable inside the box.

Close the chambor door and process the curing operation.