Remove the Model

Please follow the instructions below to remove the printed model.

1    Stand model      >2    Remove the build platform      >3    Remove the model

After the printing process is finished, the build platform will rise to allow the clinging liquid resin to flow back into the resin tank.

Lift the latch and slide the build platform outward along the rail until it stops. Then, hold the build platform by its edges and place it flat on a stable work surface beside the printer.

Col

Use the angular knife to carefully remove the printed model from the build platform.

Col

Caution

Be careful to keep the crescent ends flattening on the surface of build platform to avoid damaging the model or scratching the metal surface of the build platform.