Skip to content

Select and Print Files

Here are three ways to send a print job to the printer:

Caution

  • Before selecting the file to print, please make sure that the printing material has been stirred well, the residue at the bottom of the resin tank has been cleaned, and the optical components have been cleaned.

  • The file size limit for printing is 2.5 GB.

① Open AccuWare under the same LAN, and transmit the slice file on your computer to the Pending queue of the printer.

② Once the file transmission is completed, tap the target file on the Queue interface to enter the Detail interface to check the brand and type of the resin material and the number of sliced layers of the model.

③ After confirming all the settings, close the chamber door and click print to start printing.

① Log in to the Dental Cloud and go to Printer > Queue, select the target file in the Pending tasks list on the right side, and click the Issue button to issue the file to the Cloud queue of the printer.

② Once the file transmission is completed, the files will be downloaded in order and enter the Pending queue of the printer automatically. You can also tap the download button of the target file to change the order.

Note

When running out of memory (7.5 GB in total), the transmitted files will not be downloaded automatically. You will need to tap the download button of the target file in the Cloud queue manually if needed. The system will delete earlier print jobs listed in the Pending queue.

③ Tap the target file to enter the Detail interface to check the brand and type of the resin material and the number of sliced layers of the model.

④ After confirming all the settings, close the chamber door and click print to start printing.

① Plug the flash drive that contains the slicing file into the printer, and the Queue interface will show the icon.

② Tap to enter the Flash Drive interface, and tap the target file to enter the Detail interface and simultaneously import the file to the Pending queue.

Note

The printer can recognize USB data in the format of FAT32 or NTFS.

③ Tap the target file to enter the Detail interface to check the brand and type of the resin material and the number of sliced layers of the model.

④ After confirming all the settings, close the chamber door and click Print to start printing.

Finally, click print, and the software will pop up a window as shown below to remind you to check relevant settings before printing.

Caution

  • When starting to print, if there is a prompt for "Inconsistent material type," please tap to modify the brand and type of the printing material.

  • When starting to print, if there is a prompt for "Missing print platform" or "printed model not removed," please follow the instructions before proceeding with the print.

  • When starting to print, if there is a prompt stating that the current slice file is only suitable for the standard resin tank, please follow the instructions before proceeding with the print.
  • When starting to print, if the machine is in constant temperature mode and the temperature inside the chamber is below 23℃, the build platform will move down to the zero position by 1mm. At this point, the fan will stop working, and the resin will be heated using the projector's exposure for 1 minute before the printing begins.