Skip to content

Remote Printing

Caution

You should first check if there are any models remaining on the printing platform, or the printing screen may be broken due to the bumping of remaining model.

Caution

As the printer refuses to print once the inconsistency between material types selected on the printer touchscreen and set in AccuWare being detected, you should also check if the resin having been added correctly before printing.

Note

If the Print button is unavailable, check if the printer is on Ready state and if it is connected to the network same as the computer running AccuWare.

Note

You may change the original selected printer by opening Printer List, selecting another one and clicking Send.

Follow the steps to print just with your computer:

  1. Ensure the selected printer is connected to the same network as AccuWare.

  2. Ensure the selected printer is on the Ready state.

    You may check the real-time state of printers using following methods:

    • Check the Printer Serial No. drop down list on Print Setting page.

    • Click and check printers in Printer List.

  3. Click Print on the slicing completing interface.

    Then the model on the printing platform will be sent to selected printer for automatic analyze and print.

Follow the steps to print a local slicing file:

  1. Click in the right upper corner to open Printer List.

  2. Select a printer in Ready state, click Print.

  3. Double click a file in the file explorer, then the selected printer will start to print it.

The printer's touchscreen shows Printing state on Home page as soon as the print starts.