Skip to content

Scan Settings

In the Scan step interface, you can set scanning parameters on the left side, including Brightness and Data Quality Indicator.

Brightness

Drag the slider or use buttons on the back side of the scanner to adjust the brightness for different material or color of the object to get better scanning data. Please ensure that the object is clearly visible within the camera window and that there is no excessive red color displayed on the object.

Col


Brightness is too high

Col


Brightness is too low

Col


Brightness is normal

Data Quality Indicator

With this feature being enabled, the scanning data will be displayed in the form of quality chromatography.

  • Green indicates high-quality scanning data at that location.
  • Orange indicates low-quality scanning data at that location, which means insufficient scanning. Further scanning is needed. Otherwise, insufficiently scanned data may disappear or display abnormally after data processing.

Note

By default, this feature is disabled for texture scanning, while it is enabled for other scanning modes.