Skip to content

Optimization

Click Mesh Optimization on the right side of the screen to optimize the mesh data.

Function Description
Watertight
  • Unwatertight: unclosed model stays the way it is scanned. Its processing time is shorter than that of the watertight model.
  • Watertight: all holes will be filled automatically. This type of data can be directly used for 3D printing.
  • Caution
  • Only in watertight mesh can set model quality.
  • The watertight mode automatically fill the open area on the model surface to create a geometrically enclosed 3D model.
  • Optimization
  • None: no optimization.
  • Standard: optimize data slightly and preserves data characteristics.
  • Medium: reduce the noise on the surface of the scan data.
  • High: reduce the noise on the surface of the scan data and optimize scan details.
  • Caution
    When the optimization option is set to "High", some details in the data may be lost.
    Smooth Smooth noise on the surface of the scan data.
    Remove Small Floating Parts Delete any small floating parts that is not connected to the main data. The higher the value, the more isolated faces will be removed. Tap the screen and move the slider to adjust the value for removing isolated faces.
    Caution
    A value of 0 indicates that isolated faces will not be removed.
    Max Triangles Generate the mesh whose number of triangles is under the setting value.
    Once enabled, it will limit the maximum number of triangles. Tap the screen and move the slider to adjust the value for removing isolated faces.
    Caution
    Please set a reasonable value for the maximum number of triangles to avoid excessive simplification that may result in a decrease in data quality.
    Fill Small Hole Auto fill the small hole with a perimeter less than or equal to 10 mm (by default). You can set the hole-filling perimeter.
    Caution
    When the mesh mode is set to "watertight", the screen will not display the "Fill Small Holes" option.
    Marker Hole Filling Fill the surface holes that were not scanned due to being occluded by markers.
    Caution
    When the mesh mode is set to "watertight", the screen will not display the "Marker Hole Filling" option.
    Remove Spike Remove spike-like data on the surface.
    Recommended Parameters When turning on, it will automatically use the recommended parameters for meshing.