Skip to content

Before Scanning

  • Ensure the workspace is clean and free of any moving or interfering elements.
  • Ensure that the object to be scanned does not deform or move during the scanning.
  • Ensure that the scanner has sufficient power, with a recommended battery level of more than 30%.
  • For objects without geometric features, or for transparent/ reflective items, please perform pre-processing before scanning as shown in below.

How to scan less geometric feature objects?

If the object to be scanned does not have rich geometric or texture features, it is recommended to apply markers on the surface of the object and use the markers alignment mode.

Note

  • Apply the markers irregularly on the surface of the scanning object.
  • Do not apply markers on edges or sharp corners.
  • Ensure the spacing between markers allows the scanner to recognize more than four markers in a single frame during the scanning process.
  • If the object to be scanned is too small, you can fix the object on a workbench and apply markers on the workbench.

How to scan highly reflective/transparent objects?

For transparent and highly reflective objects, such as glasses, mirrors, and polished metal surfaces, you can apply scan spray or other non-reflective powder on the surface of the object.