Data Editing

After completing the scanning, you can edit the point cloud data to remove redundant data.

Interface Overview

Function	Description
Point Cloud / Mesh	Tap the corresponding button to switch the current data to point cloud or mesh. Note Before tapping the button to switch between point cloud and mesh, please mesh the data first.
	Tap to select whether to clear the current scan data and return to the scan interface.
	Tap this button to rename the current project.
	Tap this button to enter the clipping interface to clip the data and remove noise data.
	After tapping this button, you can choose to turn texture display on or off. Note Only projects that have turned on Acquired Texture can support turning on texture display.
	Tap this button to restore the model data to its original size and center it on the screen.
	Tap this button to mesh. Instructions If Acquire Texture is enabled, texture mapping will be automatically performed when meshing. In Foot Scan mode, foot data and plantar data will be aligned after tapping this button. In Foot Scan mode, when Acquire Texture is enabled, texture mapping will not be performed after meshing. It needs to be manually performed by tap on the mesh interface.

Function	Description
Complete	Tap the button to display the menu panel and select the export option for the project file; tap Back to Home to save the model file to the project list and return to the scan mode interface. Note After tapping to generate a mesh, when returning to the Point Cloud interface again, the button will appear.

Data Clipping

In the Point Cloud interface, tap the button on the left toolbar to clip the point cloud data. After clipping, tap the Complete button in the upper right corner to save the clipped data and return to the editing interface.

Note

Once clipping is confirmed, reverting to previous scanned data is not supported.

Editing Tools

1.On the right side of the interface, tap or to select the corresponding selection tool, and slide on the screen to select data with one finger; the selected area is displayed in red.

Col

Rectangle Selection

Col

Lasso Selection

2.For the selected area, you can use the following tools to quickly select all, invert selection, deselect, or delete.

Tool	Description
	After selecting the area, tap this button to automatically select all remaining areas connected to the selected area.
	After selecting the area, tap this button to invert the selection based on the selected area.
	After selecting the area, tap this button to deselect all selected areas.
	After selecting the area, tap this button to delete the selected area. Note After performing a delete operation, tap to undo or tap to redo the previous operation. This only supports undoing or redoing operations within this data clipping.

Auxiliary Functions

Function	Description
	After tapping this button, you can choose to turn texture display on or off. Note Only projects that have turned on Acquired Texture can support turning on texture display.
	Tap this button to restore the model data to its original size and center it on the screen.
	Long press in areas other than the button to display a magnification effect.
	Tap to switch to enabled state, at which point you can slide in areas other than the button to rotate the model. Note Using any other selection tool will automatically turn off the rotation mode and switch to the selection mode.