Skip to content

Control Center

You can swipe down from the top of the screen to bring up the control center.

Overview

Note

  • To hide the control center, use an upward swipe gesture.
  • If the control center is called up during scanning or calibration, you cannot navigate to the corresponding position by tapping the buttons in the control center.

① Status Bar

Status
Description
Time The format is hh:mm, and it is displayed in the 12-hour format by default;
You can enable 24-hour format in Settings > Date and Time.
Calibration Reminder Tap to enter the calibration process; if it's the first calibration, it will enter the Help interface.
  • : It has been 7 days since the last calibration.
  • : It has been 14 days since the last calibration.
    		•

    Screen Cast    		 The scanner is currently in casting.
    RAM Indicates the used memory space of the scanner.
    Note
    When it shows , it means that memory usage has exceeded 70%. Please pay attention to the remaining memory space.

    Hotspot    		 The scanner's wireless hotspot is currently enabled.
    Wi-Fi The current network connection status of the scanner.
    Battery Displays the current battery level of the scanner.
    Note
    If the battery level is below 20%, please replace the battery in time or use the accompanying Type-C data cable and power adapter to charge the scanner.

    ② Function Bar

    Function
    Description
    Tap to switch the scanner interface to Light Mode.
    Tap to switch the scanner interface to Dark Mode.
    Note
    This is the default display mode.
    Tap to enter the Settings interface.
    You can set Account, Software Update, Calibration, Wi-Fi, Hotspot, Language, Display, Date and Time, Storage, About, etc.; for details, see the content below.
    Note
    This entrance cannot be used during scanning or calibration.

    • Account

      Tap here to view your account information and scanner's name.

      If you are not logged in

      If you are logged in

      • This will display the passport account and name information.
      • Tap Device name to modify the scanner's name in the pop-up.
      • Tap Switch account to enter the passport login interface.
      • Tapping Log out will prompt a confirmation dialog box.

      Note

      Switching accounts does not affect the files already in the scanner.

    • Software Update

      Tap Check for Update to automatically check if the current software is the latest version.

      1. If an update is detected, tap Download the update file to initiate the download process; if you do not wish to update at this time, tap to cancel the download.
      2. After the download is complete, tap Install Now to proceed with the software installation.
      3. After the update (download and installation) is complete, the scanner will automatically restart.

      Note

      • During the download process, you can leave the current interface, and the update process will complete in the background, displaying as at the top of the interface.
      • Ensure the scanner has sufficient battery to avoid shutdown during the update process.
      • If prompted "download update interrupted", please follow the instructions.
      • Do not operate the scanner during installation.
      • The scanner must have a battery installed to complete updates when operating on external power alone.

    • Calibration

      • If you are using the scanner for the first time, please bind the calibration board included in the box; after successful binding, the calibration board number will be displayed here.

      • Tap the corresponding button in the calibration status to enter the respective calibration process; if it is your first calibration, you will first enter the Help interface.

    • Wi-Fi

      • Wi-Fi is enabled by default; for the use of the Available Networks section, please refer to Connect to Network.

      • If you are connected to the network but the network status is abnormal, tap Network Diagnosis to open a pop-up, then tap Start diagnosis to diagnose the network connection.

    • Hotspot

      Disabled by default, it will display in the status bar when enabled; the hotspot name is fixed as “EinScanRigil_xxx”.

    • Language

      Default is the language selected at startup, supporting English, Traditional Chinese, German or Japanese.

    • Display

      Supports adjusting screen brightness and switching software theme colors.

    • Date and Time

      • Set time and date automatically: After connecting to the network and enabling it, the scanner will automatically synchronize the time of the time zone.
      • Time zone: You can manually select the time zone; after that, the time displayed in the upper left corner of the scanner will be the time of selected time zone.
      • 24-hour system: When enabled, the scanner will display time in 24-hour format.

    • Storage

      Displays the scanner's disk space usage, including used amount, total storage capacity, and percentage.

    • About

      Displays basic information such as scanner's name, serial number, warranty status, software version, RAM, WLAN address, privacy policy, contact us, and the Factory Reset entrance.

      Note

      • You can modify the scanner's name and view the specific content of the warranty status and privacy policy.
      • Tapping Factory Reset will prompt a secondary confirmation pop-up; tapping Confirm again will enter the reset process (non-cancellable) and automatically restart.

    ③ Function Panel

    Function
    Description
    Wi-Fi Wireless Network Settings entrance.
    Tap the icon to quickly enable or disable the wireless network connection.
    Storage Percentage of used memory space of the scanner.
    Tap to enter Settings > Storage.
    Note
    When it shows , it means that memory usage has exceeded 70%. Please pay attention to the remaining memory space and clean up unnecessary project files as soon as possible to avoid affecting the scanning experience.
    Screen Brightness
  • ← : Darken.
  • → : Brighten.
    		•
    Calibration Calibration entrance.
  • : Tap to enter the calibration process; if it's the first calibration, it will enter the Help interface.
  • : Indicates that the calibration entrance is unavailable, possibly during scanning or calibration.
    		•
    Screen Cast Screen cast entrance.
  • : Indicates that the function is unavailable, possibly during scanning.
  • : Indicates that the function is enabled; tap to open the screen cast interface.
  • : Indicates that the function is enabled but cannot be turned off, possibly during scanning.
    		•
    Tap to enter the connection interface; for specific operation instructions, see Device Connection.
    Hotspot Hotspot Settings entrance.
    Tap the icon to quickly enable or disable the hotspot.