Data Editing

After completing the scanning, you can edit the point cloud data to remove redundant data; additionally, after editing the point cloud data, tap to continue scanning.

Interface Overview

Function	Description
Point Cloud / Mesh	Tap the corresponding button to switch the current data to point cloud or mesh. Note Before tapping the button to switch between point cloud and mesh, please mesh the data first.
	Tap this button to rename the current project.
	Tap this button to return to the scan interface for continued scanning and other operations. Note After returning to the scan interface, switching the scan mode of this project or reverting previously edited data is not supported.
	Tap this button to enter the clipping interface to clip the data and remove noise data.
	After tapping this button, you can choose to turn texture display on or off. Note Only projects that have turned on Acquired Texture can support turning on texture display.
	Tap this button to restore the model data to its original size and center it on the screen.
	Tap this button to optimize and align the scanned data. Note This function is only supported in laser mode.
	After tapping this button, you can manually set the mesh parameters to generate a mesh; for detailed content, please refer to Mesh.
	Tap this button to save the global markers file to the scanner for later import. Note You can export the file only in Marker Alignment mode or Global Markers mode.

Function	Description
Complete	Tap this button to save the current project to the File List and return to the Scanning Preview interface.
Delete	Tap this button to delete the data of the current project. Note Once data is deleted, it cannot be recovered.

Data Clipping

In the Point Cloud interface, tap the button on the left toolbar to clip the point cloud data. After clipping, tap the Complete button in the upper right corner to save the clipped data and return to the editing interface.

Note

Once clipping is confirmed, reverting to previous scanned data is not supported.

Editing Tools

1. On the right side of the interface, tap or to select the corresponding selection tool, and slide on the screen to select data with one finger.

   Col

   

   Rectangle Selection

   Col

   

   Lasso Selection

2. For the selected area, you can use the following tools to quickly select all, invert selection, deselect, or delete.

   Tool	Description
   	After selecting the area, tap this button to automatically select all remaining areas connected to the selected area.
   	After selecting the area, tap this button to invert the selection based on the selected area.
   	After selecting the area, tap this button to deselect all selected areas.
   	After selecting the area, tap this button to delete the selected area. Note After performing a delete operation, tap to undo or tap to redo the previous operation. This only supports undoing or redoing operations within this data clipping.

Auxiliary Functions

Function	Description
	After tapping this button, you can choose to turn texture display on or off. Note Only projects that have turned on Acquired Texture can support turning on texture display.
	Tap this button to restore the model data to its original size and center it on the screen.
	Long press in areas other than the button to display a magnification effect.
	Tap to switch to enabled state, at which point you can slide in areas other than the button to rotate the model. Note Using any other selection tool will automatically turn off the rotation mode and switch to the selection mode.