Skip to content

Save and Export

In the Point Cloud / Mesh interface, tap the Complete button in the upper right corner to save or update the current project to the file list.

In the Mesh interface, tap the button in the upper right corner to choose to upload the current model to SHINING 3D Cloud or Export to other devices.

Note

  • OBJ format file names only support English letters and numbers.
  • Supports exporting project files to OBJ, PLY, or STL formats.
  • Projects that have not enabled Texture Acquisition can only be exported as STL format.
  • If you open a model file from the file list, tap in the upper right corner of the Mesh interface to choose the export method for the current model.

Upload to SHINING 3D Cloud

In the Mesh interface, tap > SHINING 3D Cloud button to upload the model file to SHINING 3D Cloud (designated node).

Note

  • If you are not logged into the passport, a login window will automatically pop up.
  • The node for SHINING 3D Cloud is allocated automatically, and please log into the designated node to view the shared model.
  • If the selected space is less than 500 MB, it will prompt that "The mesh file is too large", please simplify it before uploading.
  • If the model file has already been uploaded, a corresponding QR code for downloading the model will be displayed.

Wired Export

After completing scanning, in the Mesh interface, tap > PC (USB-C) button to save the project file to the local Models folder, then pull down from the top of the screen to bring up the control center, enable USB Drive Mode, and connect to a computer using a data cable to export the model files.

Note

  • USB Drive Mode and EXScan Rigil connection status cannot coexist. If already connected to EXScan Rigil, you need to disconnect from EXScan Rigil when using USB Drive Mode.
  • When accessing the device's specified folder through the computer's file manager and deleting model files in the specified folder, it will not affect the model files in the device's file list.