Getting Started¶
This chapter provides an overview for the EinScan Rigil / EinScan Rigil Pro V1.1.4 wireless all-in-one 3D scanner, helping you quickly locate the instructions you need.
-
Here you can learn about the scanner, including its appearance and activation process.
Scanning with EXScan Rigil¶
When using the scanner to scan and process projects with large amounts of data, you need to install EXScan Rigil software (hereinafter referred to as the "software"); click here to view the user manual for EXScan Rigil.
-
How to download EXScan Rigil?
Please log in to Download Center, select the software to download; for more details, see Installation.
-
How to scan with EXScan Rigil?
Tap
to enter the connection interface; for more details, see Connection.Note
Please install and start the software before connecting the EinScan Rigil / EinScan Rigil Pro.
Scanning with EinScan Rigil / EinScan Rigil Pro¶
Once you have successfully activated the scanner, follow the steps below to use it.
-
Calibrate the Scanner
Calibration ensures the accuracy of the scanner and improves the scanning quality.
-
Do Basic Settings
Before scanning, you can set the scanner's display, sound, and transmission options.
-
Prepare for the Scan
You can do some preparation before scanning to ensure a good scanning experience.
-
Pre-set for the Scan
After the necessary preparation for the scan, you can adjust relevant scanning settings to improve scan results.
Some of these settings can also be adjusted during the scanning. -
Scan and Generate a Point Cloud
After setting the scanning settings, start scanning and generate the point cloud.
-
Edit Data
You can edit the scanned data after pausing or completing the scan to clip the redundant data.
-
Post-Processing
You can mesh or measure the model and share it.