Mesh model

Meshing is to convert the point cloud into a triangular mesh surface. The data after mesh can be directly used for rendering, measurement or printing.

Mesh type

Icon	Function	Instruction
	Unwatertight	Unclosed model stays the way it's scanned. Processing time is quicker than Watertight.
	Watertight	All holes will be filled automatically. The data can directly be 3D printed. Only watertight mesh can set model quality.

Mesh optimization

Optimization	Instruction	Note
Filter	Optimize the data and improve the clarity of the data. The higher the level, the less the small details .	- None: No optimization - Low: Optimizes data slightly and preserves data characteristics - Med: Reduce the noise on the surface of the scan data - High: Reduce the noise on the surface of the scan data and sharpen it powerfully.
Smooth	Smooth the possible noise on the surface of the scan data.
Remove small floating parts	Remove small floating parts on the model.
Max triangles	Set max plate number to get mesh model's triangle plate number is within configured plate number.
Fill small hole	Auto fill the small hole when mesh.	Small holes with a perimeter less than or equal to 10 mm (by default) will be automatically filled. You can set the hole-filling perimeter.
Remove spike	Remove spike-like data on the image edge.
Markers hole filling	Fill in the surface of the object thats not scanned to the pasting marker.
Recommended parameters	When turning on, it will automatically use the recommended parameters for meshing.

Operation

Click Apply to confirm the settings and start meshing.
Click to restore.
Click Confirm to confirm the mesh result.