Skip to content

Alignment

If there are multiple projects in a project file, you need to align the data after Scanning.

Click on the right panel of the Scan step interface and start project alignment.

Mode
Description
Note

By Feature
  1. Choose By Feature.
  2. Select the project which needs alignment in the fixed window and the floated window.
  3. Click Apply to align the data.
 Objects that have repeatable features (like rounds or rings) or small objects are not suitable for this mode.

By Manual		 Manually choose at least 3 common features on the data in the fixed window and the floated window respectively and click Apply to align the data. The chosen features should not be in a line.

By Markers
  1. Choose By Markers.
  2. Select the project which needs alignment in the fixed window and the floated window.
  3. Click Apply and align the data.
 The two projects should have at least 3 markers in common.

By Manual Markers		 Manually choose at least 3 common markers on the data in the fixed window and the floated window respectively and click Apply to align the data. The chosen markers should not be in a line.

Note

Manual alignment serves as an auxillary method of auto alignment. You can choose it when auto alignment fails.