Device Introduction¶
EinScan Pro 2X V2 / EinScan Pro 2X 2020 builds upon the excellent performance of EinScan Pro 2X and focuses on handheld 3D scanning functionality. With two handheld modes, it meets the 3D scanning and modeling needs of small to medium-sized objects with various details and precision requirements. It balances detail and efficiency and is accompanied by user-friendly software, making it an ideal choice for handheld scanning users.
Standard Pack
Caution
Please only use water to clean the calibration board, avoid touching any corrosive liquid.
Industrial Pack (optional)
Color Pack (optional)
Turn on the device and connect it to the computer through USB 3.0 port.
Warning
- Make sure you are using the correct power adapter.
- If you use a turntable, you need to connect the turntable power and data cables separately.
Industrial pack and color pack are available for purchase，suitable for series of scenarios：
- Compatible with multiple scanning modes, including Fixed Scan, Handheld HD Scan and Handheld Rapid Scan.
- Compatible with multiple align modes, including Features, Markers, Texture alignment (with the color pack applied) and Hybrid alignment modes.
1. Remove the quick release plate from the tripod, fasten it onto the scanner tray, and fasten the scanner tray onto the tripod, then place the scanner on the tray.
2. Plug the USB cable into the USB port of the turntable and connect it to the computer. Connect the power cable to the turntable.
1. Hold the device upright and remove the USB port cover. The cover is located near the logo on the right side of the device.
2. Insert the Color Pack and lock it with a rotary lever.