Getting Started¶
This chapter provides an overview guide for Einstar Vega handheld 3D scanner and its accompanying desktop post-processing software 
StarVision, making it easy for you to find the corresponding instructions.
About Einstar Vega¶
-
You can learn about the scanner here, including the appearance & specification of the scanner and its activation process.
After activation, follow the steps below to use the scanner.
-
Calibrate the Scanner
Calibration ensures the accuracy of the scanner and improves the scanning quality.
-
Prepare for the Scan
You can do some preparation before scanning to enhance your scanning.
-
Pre-set for the Scan
After the necessary preparation for the scan is done, you can adjust relevant scanning settings to get a better scan result.
Some of those settings can also be adjusted during the scan. -
Scan and Generate a Point Cloud
After you set scanning parameters, scan the object and generate a point cloud.
-
Edit the Point Cloud
You can edit the scanned data after completing the scan to clip the redundant data.
-
Post-process
You can mesh the model and share it.
About StarVision¶
-
You can learn about the desktop software here, including its function list and interface overview.
After installation, follow the steps below to use the software.
-
Create a Workspace
Before performing data or mesh edits, you need to create a workspace and import the model into it.
-
Edit the Point Cloud
You can choose a point cloud project and clip the redundant data.
-
Post-process and Measure
You can mesh the model and measure it.
-
Export and Share
You can export the project or upload the model to SHINING 3D Digital Cloud.