Getting Started¶
This chapter provides an overview guide (V1.3.3) for Einstar Vega wireless all-in-one 3D scanner, making it easy for you to find the corresponding instructions; if you are using another version, please refer to the corresponding user manual in the history version.
If you need to view the user manual in other languages, you can click 
on the right side of the top navigation bar to switch to the corresponding language.
-
You can learn about the scanner here, including the appearance & interface of the scanner and its activation process.
After activation, follow the steps below to use the scanner.
-
Calibrate the Scanner
Calibration ensures the accuracy of the scanner and improves the scanning quality.
-
Prepare for the Scan
You can do some preparation before scanning to enhance your scanning.
-
Pre-set for the Scan
After the necessary preparation for the scan is done, you can adjust relevant scanning settings to get a better scan result.
Some of those settings can also be adjusted during the scan. -
Scan and Generate a Point Cloud
After you set scanning parameters, scan the object and generate a point cloud.
-
Edit the Point Cloud
You can edit the scanned data after completing the scan to clip the redundant data.
-
Post-process and Measure
You can mesh & measure the model and share it.