Skip to content

Save and Export

In the Mesh interface, you can tap the Save button in the upper right corner to save or update the current project to the file list; tap to choose to upload the current model to SHINING 3D Cloud or Export to other devices.

Note

  • OBJ format file names only support English letters and numbers.
  • Supports exporting project files to OBJ, PLY, or STL formats.
  • Projects that have not enabled Texture Acquisition can only be exported as STL format.
  • If you open a model file from the file list, you can tap in the upper right corner of the Mesh interface to choose the export method for the current model.

Upload to SHINING 3D Cloud

In the Mesh interface, you can tap > SHINING 3D Cloud button to upload the current project's model file to SHINING 3D Cloud (designated node).

Note

  • If you are not currently logged into SHINING 3D Passport, a login window will automatically pop up.
  • SHINING 3D Cloud nodes are automatically assigned, please log into the designated node to view the shared model; supports modifying the model name and selecting a space in the share popup window.
  • If the selected space has less than 500 MB of remaining capacity, it will prompt "Mesh file is too large", please simplify it before uploading.
  • If the model file has already been uploaded, the corresponding model download QR code will be displayed.

Wired Export

After completing scanning, in the Mesh interface, you can tap > PC (USB-C) button to save the project file to the local Models folder, then pull down from the top of the screen to bring up the control center, enable USB Drive Mode, and then connect to a computer using a data cable to export the model files.

Note

  • USB Drive Mode and StarVision connection status cannot coexist. If already connected to StarVision, you need to disconnect from StarVision when using USB Drive Mode.
  • When accessing the device's specified folder through the computer's file manager and deleting model files in the specified folder, it will not affect the model files in the device's file list.