Skip to content

Connection

Supports both wireless and wired connections to devices. Once connected, you can use the software with the scanner for scanning, file transfer, and other operations.

Note

  • Device connection is unavailable while scanning with EinScan Rigil / EinScan Rigil Pro.
  • If you're using EinScan Rigil / EinScan Rigil Pro for screen casting, the casting will automatically disconnect when entering the device connection interface, and screen casting cannot be initiated.

Wireless Connection

  1. Swipe down the control center from the top of the scanner screen, or tap to enter the file list interface.

  2. Tap to enter the connection interface.

    Note

    After entering the connection interface, EinScan Rigil / EinScan Rigil Pro will automatically enable hotspot mode. The connection interface will display the scanner's wireless hotspot name and password.

  3. Search for the scanner's hotspot on your computer and connect to it.

    Note

    If the computer does not search for the scanner's hotspot, swipe down the control center from the top of the scanner screen, select > Hotspot, and turn the scanner's hotspot off and on again.

  4. Once connected, you can perform scanning, file transfer, and other operations with the scanner.

Wired Connection

  1. Swipe down from the top of the scanner screen to open the control center, or tap to enter the file list interface.
  2. Tap to enter the connection interface.
  3. Use the provided Type-C cable to connect the scanner to your computer.
  4. When the software detects the scanner, it will automatically connect to the scanner.
  5. Once connected, you can perform scanning, file transfer, and other operations with the scanner.

Note

Start the software before connecting the scanner to the computer with the provided Type-C cable. If you have connected the scanner before, reconnect the Type-C cable after starting the software.

Disconnection

After successful connection, you can disconnect by clicking on the software homepage of EXScan Rigil, or by tapping Disconnect on the connection interface of EinScan Rigil / EinScan Rigil Pro.

Note

Only one device can be connected at a time. To switch devices, please disconnect the currently connected device first.