Skip to content

Project Group

Project group is the standard file structure of the software. It contains one project or more. Each project contains the data of its own. You need to create or open a Project Group before scanning.

Create a Project Group

Note

If you select IR scan, set parameters such as scan mode and alignment mode when creating a new project group; for details, please see the [Project Group Settings] (pc-project-group-settings.md).

Two ways to create a project group:

Method One: Click New project group in the home screen interface.

Method Two: Click and select New project group in the scanning interface.

In the prompt window, name the project group and click Browse to select the save path; then click Confirm and all scanned data will be saved to the folder with the name you just set.

Open a Project Group

You can open a project group and perform re-scanning or editing on the scanned data.

Method One: Click Open project group on the home screen interface.

Method Two: Click and select Open project group in the scanning interface.

In the prompt window, select the project group file and then click Open.

Note

  • The current project group will be saved automatically when opening a project group.
  • To rescan the imported project, use the same device that scanned the imported project.
  • For project files imported from EinScan Rigil / EinScan Rigil Pro, only the point clouds are retained.
  • For project files imported from EinScan Rigil / EinScan Rigil Pro, rescanning is not supported in the software. You can only generate point clouds, mesh and measure in the software.