Alignment
You can use the alignment function to combine scan data from multiple projects into a complete 3D model to enhance the integrity of the scan data.
Click 
on the right panel to enter the alignment interface.
Note
- Shift + left mouse button ：To select data.
- Ctrl + left mouse button ：To cancel the selection.
| Alignment |
Description |
Note |
Feature Align |
- Choose Feature Align.
- Select the project to be aligned in the fixed window and the floated window.
- Click Apply to align them.
|
Objects with repeated features, like a round or a ring, or that with small size are not suitable for this mode. |
Manual Align |
- Choose Manual Align.
- Manually choose at least 3 common feature points on the data in the fixed window and the floated window respectively.
- Click Apply to align them.
|
- The chosen points should not be in a line.
- Manual feature alignment is a supplement to auto feature alignment, and can be used when it fails.
|
Markers Point Align |
- Choose Markers Point Align.
- Select the project to be aligned in the fixed window and the floated window.
- Click Apply to align them.
|
The two projects should have at least 3 markers in common. |
Markers Point Manual Align |
- Choose Markers Point Manual Align.
- Select the project to be aligned in the fixed window and the floated window.
- Manually choose at least 3 common markers on the data in the fixed window and the floated window respectively.
- Click Apply to align them.
|
The chosen markers should not be in a line. |