Skip to content

Calibration notice

Through calibration, all the parameters are recalculated to ensure the accuracy of the device and the quality of scan data.

Note

Calibration is required when:

  • The scanner is used for the first time.
  • The scanned data is incomplete or its quality drops.
  • The scanner is severely shaken or jolted, for example, during transport.
  • The accuracy drops during scanning, such as frequent alignment failures or frequent indications of tracking lost.
  • The scanner has not been calibrated for more than 14 days. In this situation, the software will prompt you to calibrate the scanner.

Caution

  • Do not wipe it with any chemical liquid.
  • Use the calibration board supplied with the device.
  • The calibration board are only used for calibration.
  • Please put the calibration board in the flannel bag after use.
  • Do not place heavy objects or sundries on the calibration board.
  • Always make sure that both sides of the calibration board are clean and free of scratches.
  • Keep the calibration board away from corrosives, metals and sharp objects to avoid corrosion or damage.