Skip to content

White balance

To ensure the accuracy of the texture data, it is better to adjust the white balance whenever there is a change in ambient brightness.

Caution

  • Do not move the calibration board during the adjustment.
  • To get a better texture, make sure the calibration board is clean.
  • Do not adjust the white balance or scan the object under strong light in order to avoid color cast and other problems.
  • If the texture is unsatisfying, change the ambient brightness and redo the white balance or redo the white balance directly.

Steps

  1. Place the calibration board horizontally with the white side facing up.

  2. Pay attention to the camera window on the left and direct the camera at the middle of the calibration board.

  3. Hold still and press on the scanner to start adjustment.

  4. Move the scanner up and down slowly, and the scanner will take a clearest photo automatically to finish the adjustment.

Note

  • If the adjustment fails, please try it again.
  • If you still fail to calibrate the scanner, please contact your supplier or our support team.
  • After the adjustment, click Next on the pop-up to enter Scan Mode.