Skip to content

Quick Start Guide

This chapter provides an overview of EXStar Hub V1.0.6 to help you quickly find relevant operation instructions. If you are using another version, please refer to the corresponding user manual in the history version.

  • How to check the current software version?

    Click in the upper-right corner > About to view the current software version.

If your device is not connected, you can only use EXStar Hub to import projects for post-processing or measurement. To use scanning functions, connect your device first.

  • How to connect devices?

    Both wireless and wired connections are supported. For detailed instructions, please refer to Device Connection.

  • How to activate devices?

    The device can only be activated when connected to a wired connection. For detailed instructions, please refer to Device Activation.

  • Home Screen

    Basic settings, connecting or disconnecting devices, creating projects, viewing projects, and other operations can be performed on the home screen. For details, please refer to Home Screen.

If you are using the device for the first time or have not recalibrated it for a long time, please calibrate it after connecting the device via cable.

  • Calibration

    This device supports camera calibration and white balance calibration.

    Camera Calibration: Perform camera calibration when using the device for the first time, after a long time without recalibrating, or after changing the calibration board.

    White Balance Calibration: Perform white balance calibration before texture scanning or when there is a discrepancy between the scanned texture and the actual texture.

After the device is activated and connected, operate the device according to the following steps.