Skip to content

About the User Manual

This user manual (hereinafter referred to as "the Manual") introduces the hardware configuration, software installation and software usage process of the Einstar Handheld 3D Scanner (hereinafter referred to as "the Scanner").

Symbol Convention

Signal Meaning
Note: Additional information for particular situation.
Caution: Improper actions or conditions that may damage the product, and consequently void your warranty or service contract or lose the customer data or system data.
Warning: The safety instructions that you must precisely follow to avoid injury. Failure to observe can cause damages to your product, or result in personal injuries.

Compliance

Symbol Description
LVD/EMC Directive
This product complies with the European Low Voltage Directive 2014/35/EU and EMC Directive 2014/30/EU.
WEEE Directive-2012/19/EU
The product this manual refers to is covered by the Waste Electrical & Electronic Equipment (WEEE) Directive and must be disposed of in a responsible manner.
This device complies with "IEC 60825-1:2014 Safety of laser products Part 1: Equipment classification and requirements".
Wavelength:940nm
Pulse width:9ms
Maximum light power:0.7W
The UKCA marking is the product marking used for products being placed on the market in Great Britain(England, Scotland and Walse).

This document is related to your safety, lawful rights and responsibilities. Read it carefully before installing and using the product.

  • SHINING 3D Tech Co., Ltd. (hereinafter referred to as "the Company") owns complete intellectual property rights for the contents of this document and, without the written consent of the Company, it is not allowed to copy, transmit, publish, reedit, compile or translate any contents of this document for any purpose or in any form.

  • The document is a guidance for installing, operating, and maintaining the product, including the Device, software, or other products provided by the Company, to which the document is applicable. The document does not serve as the quality guaranty for the product. While the Company makes all efforts to ensure the applicability of the content of the document, it reserves the right to interpret and modify the content of the document and possible errors and omissions therein. The contents of the document are subject to changes without further notice.

  • Images and diagrams in the document are presented to provide convenience to readers. In the event that any images or diagrams are inconsistent with the physical product, the later shall prevail.

  • It is recommended that professionals or technicians shall operate and/or use relevant Products. The Company shall not be held responsible for any damages and/or losses caused by negligence, environmental factors, improper maintenance and use, or any other factors other than due to the quality of the Product.

  • Disputes arising from the document and related Products thereof shall be governed by the laws of the People’s Republic of China.

  • In the event of any ambiguity and/or any advice on the contents of the document, please contact us by the contact information in this document.