Skip to content

Project Settings

After creating a new project group, please configure the project group.
Different scanning modes have different settings, including alignment mode, resolution and texture.

Note

For Object Scan mode, it supports setting the object size.

Select alignment mode

Alignment Mode Description
Feature alignment Use objects' geometric features for auto aligning during scanning.
Suitable for objects with rich surface features.
Texture alignment Use objects' surface texture features for auto aligning during scanning.
Suitable for objects with rich surface patterns, but lacking rich and variable geometric features.

Note

Alignment mode supports multi-selection, namely mixing feature and texture alignment.

Select resolution

Resolution Description
High 0.5 mm
Medium 1.0 mm
Low 2.0 mm

Note

With smaller setting value, you will get more details, but it will lead to larger file size and longer processing time.

Texture Scan

You can enable or disable texture scan, but it can not be disabled under the Texture alignment mode.

Note

Texture switch cannot be changed once the project group has been created.

Object size

Object Size Description
Medium and large object Object size larger than 200mm X 200mm X 200mm.
Small object Object size between 100mm X 100mm X 100mm and 200mm X 200mm X 200mm.

Select alignment mode

Alignment Mode Description
Hybrid alignment Support selecting one or multiple modes among features, texture and markers alignment modes.
If the scanned object has rich and variable geometric or texture features, it is recommended that you select features or texture alignment mode.
Global markers alignment After selecting this alignment mode, open global markers file or scan global markers directly in scanning settings to assist scanning and aligning.

Note

  • The global markers alignment mode or hybrid alignment mode (including markers) also supports open a global markers file in scanning settings.
  • The frame rate is relatively low under the texture alignment mode, which could affect the fluency of scanning, thus it is recommended that you select this mode only when needed.

Select resolution

Resolution Description
High
  • Medium and large object: 0.2 mm.
  • Small object: 0.1 mm.
Medium
  • Medium and large object: 0.5 mm.
  • Small object: 0.2 mm.
Low
  • Medium and large object: 2.0 mm.
  • Small object: 0.5 mm.

Note

  • With smaller setting value, you will get more details, but it will lead to larger file size and longer processing time.
  • Resolution cannot be changed once the project group has been created.

Texture Scan

You can enable or disable texture scan, but it can not be disabled under the Texture alignment mode.

Note

Texture switch cannot be changed once the project group has been created.