Project Setting
Laser Scan¶
Three kinds of resolution are provided for quick selection, and you can also drag the slider to set it.
IR Mode¶
Two kinds of scanning models are supported in the IR mode: Portrait and Object.
Alignment¶
Different alignment methods and resolutions can be chosen in different scanning modes.
| Feature | 0.2mm~3.0mm-1.0mm by default | Feature Alignment: Align the data automatically during scanning by object geometric features. Rich features on the object are required for this mode. | |
| ●Feature ●Hybrid ●Global Markers |
Normal: 0.2mm~3.0mm-0.5mm by default For small objects: 0.1mm~0.5mm-0.2mm by default |
Hybrid Alignment: Align the data by object geometric features and markers of the file. To use this method when scanning the object of which geometric features are different from part to part. Global Markers Alignment: Align the data by the markers of the imported marker file or the scanned marker file.  Note●Import a marker file or scan makrers first in the global markers alignmrnt mode. ●Hybrid alignment here means feature alignment plus global markers alignment. ●Markers alignment is not supported in the small object scanning mode. |
Note
●The smaller the resolution is, the more data details can be obtained, but the engineering data will be larger and the processing time will be longer.
●The new created project under the project group will automatically use the same resolution of the project group and the resolution cannot be modified.