Mesh Editing

After the model data is meshed, the software automatically switches to the Post-Processing interface. Alternatively, you can directly click on the navigation bar to enter the Post-Processing interface and import the data.

Left Panel

Click + to check the function.

Function	Instruction	Note
Simplification	After simplification, the polygon numbers, file size and detail of data will be reduced universally. Set the ratio from 0 to 99 and the default is 0.	The result will not be added by multiple operations on Simplification.
Mesh Optimization	It can optimize the quality of the data by adding more triangles to curvature regions. Set the ratio from 0 to 100 and the default is 0.	/
Smooth	Smooth the possible noise on the surface of the data. Set the ratio from 0 to 100 and the default is 0.	It might remove some small details or smooth some sharp edges at the same time.
Remove Small Floating Parts	Remove small floating parts which are not connected to the main data. The maximum value is the square of the diagonal length of the floating part/10, MAX=(L/10)². Set the ratio from 0 to 100 and the default is 0.	The result will not be added by multiple operations on Remove Small Floating Parts.

Function	Instruction	Note
Auto Hole Filling	Automatically fill all holes with a smaller perimeter than the number input.	Filling type:
Manual Hole Filling	Choose the filling type and click the holes to be filled. The hole edges are shown in green and the holes get red after filling.	/
Cutting Plane Tool	Define a plane by drawing a straight line. Delete the selection and close the mesh at the intersection. Use the cutting plane to align the mesh to the CSYS.	/

Note

When performing hole filling operations, you can first delete the neighboring areas by setting it to optimize the final hole filling effect. The larger the value set for the deletion neighborhood, the more data will be deleted at the edge of the hole.

Bottom Panel

For more details, please refer to Data Editing.

Right Panel

Icon	Function	Description
	Open File	To open a file (STL, OBJ, PLY) for Post-Processing.
	Export the Scan	: To save the scanned data in the specified format (ASC, XYZ, LAS, TXT, STL, OBJ, PLY, 3MF) locally. : If you have installed the EXModel and you are in the Post-Processing or Measurement interface with mesh data, click to switch to the EXModel and the data will be imported into it automatically.
	Share You Scan	To use your Sketchfab account to share the model.
	Third-party Software	To open the third-party software.
	Model Display	After clicking or press F12, the model will be displayed in rotation, and the rotation speed can be adjusted by clicking . Press F12 again or Esc to exit the model display interface. The model is only displayed in the clockwise rotation at the current viewing angle. If you need to display other angles, please exit and adjust the display angle in the Post-Processing interface.