Skip to content

Connection

Caution

Please make sure you are using the correct power adapter.

Steps

  1. Connect aviation cable (4) to power port and USB port on the scanner.
  2. Connect power cord (3) and the power adapter (2).
  3. Connect power adapter (2) into aviation cable (4).
  4. Connect USB port on the aviation cable to the PC USB 3.0 port.
  5. Insert the Dongle (5) into the PC USB port.
  6. Plug in a socket to power up.

Note

  • If you need to use the full functionality, please insert the dongle.
  • If you don't insert the dongle and only connect the device, the software will automatically enter the guest mode when you start it.
  • If you don't insert the dongle and don't connect the device, the software will automatically enter guest mode after selecting the device type.