Skip to content

Calibration Preparation

You can re-adjust parameters of the device through calibration, which not only ensures the accuracy of the device, but also the scanning quality.

Note

Calibration is required under the following conditions:

  • The first time for using the device.
  • The scanner was severely shaken or vibrated during transportation.
  • The scanner is used for the first time or it is not in use for a long period of time (1-2 weeks).
  • The accuracy drops during scanning, such as frequent alignment failures or the inability to identify markers.
  • Incomplete data is acquired or the quality of scanned data drops during scanning.

Caution

  • Do not wipe the calibration board with chemical liquids.
  • Do not put heavy objects or sundries on the calibration board.
  • After using the calibration board, put it in the flannel bag.
  • The calibration board can only be used for the calibration of the device.
  • Keep the calibration board away from corrosives, metals and sharp objects to avoid corrosion or damage.
  • Make sure that the markers on the calibration board aren't damaged or stained, and that the front side of the calibration board is clean and free of scratches.
  • The calibration board is matched to the scanner. Calibrating with an mismatched calibration board will lead to inaccuracy or fail to get good scanned data.
  • After powering on the device, please heat it to a proper temperature before the calibration to ensure accuracy and precision.