Manual Alignment

Select points on the CAD model and the mesh model for alignment to achieve more precise alignment, providing a basis for subsequent re-inspection.

Steps:

1. In the inspection interface, tap Manual Alignment to enter the alignment interface.

2. Double-tap to select 3 - 8 corresponding points on both the CAD model and the mesh model.

   Caution

   Do not arrange the points in a straight line.

3. Tap to confirm the alignment.

   Note

   If the alignment result is unsatisfactory, tap to reset all points and alignment results, and perform the alignment again.

4. After the alignment is complete, tap Re-inspect to view the inspection results after alignment.