Connection

Please connect all parts as the following steps.

Introduction to the Parts

No.	Name	Description
1	Optical Tracker	An optical tracker, which can be installed on a tripod.
2	Tracker Cable	One end for the tracker and the other end for the hub. At the tracker end: One port for power supply, and the other port for data transmission.
3	Laser Scanner	Device for contactless detection of surfaces.
4	Scanner Cable	One end for the scanner and the other end for the hub. At the scanner end: One port for power supply, and the other port for data transmission.
5	Hub	To connect the tracker, the scanner and the computer.
6	Hub Power Cable	To connect the hub to the power supply.
7	Data Cable	To connect the hub with the computer.
8	Dongle	To authorize the use of the software.

Introduction to the Hub

Front PortsBack Ports

No.	Name	Description
1	USB Port	To connect the tracker, the scanner and the computer to transmit data.
2	Network Port	To connect the computer or the switch to test.
3	Auxillary Power Input	To connect the power adapter (24 V, 3.75 A). It is only available when an extended tracker is used.
4	System Power Input	To connect the power adapter (24 V, 3.75 A). It is a main power input of the system.

No.	Name	Description
1	Power Output	To power on the extended tracker.
2	Power Output	To power on the tracker.
3	Power Output	To power on the scanner.
4	Network Port	To transmit data of the extended tracker.
5	Network Port	To transmit data of the tracker.
6	USB Port	To transmit data of the scanner.

Wired Connection

1. Install the tracker on the tripod and tighten the bolts.

2. Connect one end of the tracker cable with the tracker.

   

3. Connect the other end of the tracker cable with the hub.

4. Connect one end of the scanner cable with the scanner.

   

5. Connect the other end of the scanner cable with the hub.

   

6. Connect the hub and the outlet with the hub power cable.

7. Connect the hub and the computer with the data cable.

   

8. Power on the device.