Alignment

Through alignment, multiple scanned data are combined into a larger mesh, thereby effectively solving the problem of incomplete data collection at one time.

Caution

When more than two project files with scanned data are present in the project list, these projects can be aligned.

Click on the right side of the interface to enter the project alignment interface.

Mode	Description	Note
Auto Feature Alignment	Choose Auto Feature Alignment. Select a project to be aligned in the fixed window and the floated window respectively. Click Apply to align them.	Objects with repeated features, like a round or a ring, or with small size are not suitable for this mode.
Manual Feature Alignment	Choose Manual Feature Alignment. Manually choose at least 3 common feature points on the data in the fixed window and the floated window respectively. Click Apply to align them.	The chosen points should not be in a line.
By Markers	Choose By Markers. Select a project to be aligned in the fixed window and the floated window respectively. Click Apply to align them.	The two projects should have at least 3 markers in common.
Manual Markers Alignment	Choose Manual Markers Alignment. Select a project to be aligned in the fixed window and the floated window respectively. Manually choose at least 3 common markers on the data in the fixed window and the floated window respectively. Click Apply to align them.	The chosen markers should not be in a line.

Note

Manual alignment serves as an alternative method of auto alignment. You can choose it when auto alignment fails.