Skip to content

Preparation

Caution

  • Ensure the lens is free of scratches or damages.
  • Ensure the device is connected and powered on.
  • Ensure a secure joint of the scanner with the tripod and make them stable.
  • Do not touch the lens with your fingers lest fingerprints be left to affect data acquisition.

Note

When scanning mesh in Trak Mode:

  • No need to place markers on the objects.
  • Make sure the object to be scanned is in the visual field of the tracker.
  • Do not cover, touch or damage the balls on the scanner when it is working.
  • Do not move the object and the tracker during scanning.

Note

When scanning markers in Trak Mode or Laser Mode:

  • Need to place markers on the objects.
  • Place the markers evenly and randomly.
  • Do not use damaged or incomplete markers.
  • Do not use greasy, dusty, or dirty markers.
  • Do not attach the markers to a surface with high curvature.
  • If the device fails to capture markers, it will not emit laser lines.
  • Four markers are required for the alignment of common areas.
  • Ensure that the device's camera can scan at least 3 markers within the normal scanning range.
  • Place markers with a diameter of less than 6 mm to edges and/or small areas of the model.
  • Ensure that the distance between markers is about 50 cm when scanning markers in Trak Mode and the distance between markers is about 2-10 cm when scanning in Laser Mode.

Col

Markers are attached correctly

Col

Artificial grouping of markers

Col

Attach markers only in one line