Skip to content

Connection

Please connect all parts as the following steps.

Introduction to the Parts

No. Name
Description
1 Optical Tracker An optical tracker, which can be installed on a tripod.
2 Tracker Cable
  • One end for the tracker and the other end for the hub.
  • At the tracker end: One port for power supply, and the other port for data transmission.
    		•
    3 Laser Scanner Device for contactless detection of surfaces.
    4 Scanner Cable
  • One end for the scanner and the other end for the hub.
  • At the scanner end: One port for power supply, and the other port for data transmission.
    		•
    5 Hub To connect the tracker, the scanner and the computer.
    6 Hub Power Cable To connect the hub to the power supply.
    7 Network Cable To connect the hub with the computer.
    8 Dongle To authorize the use of the software.

    Introduction to the Hub

    No. Name
    Description
    1 Network Port To connect the tracker, the scanner and the computer to transmit data.
    2 Auxillary Power Input To connect the power adapter. It is only available when an extended tracker is used.
    3 System Power Input To connect the power adapter. It is a main power input of the system.

    No. Name
    Description
    1 Power Output To power on the extended tracker.
    2 Power Output To power on the tracker.
    3 Power Output To power on the scanner.
    4 Network Port To transmit data of the extended tracker.
    5 Network Port To transmit data of the tracker.
    6 Network Port To transmit data of the scanner.

    Wired Connection

    1. Install the tracker on the tripod and tighten the bolts.

    2. Insert the power plug and data cable plug into the bottom socket of the tracker.

    3. Insert the power plug and data cable plug into the bottom socket of the scanner.

    4. Insert the power plug and data cable plug of the tracker into the hub.

    5. Insert the power plug and data cable plug of the scanner into the hub.

    6. Connect one end of the network cable to the hub and the other end to the computer's network port.

    7. Power on the device.

    Wireless Connection

    Col

    1. Connect your computer and router by a network cable.
    2. Power on the router, scanner, and tracker respectively.
    3. After launching the software, check the device connection status.

    Col

    Note

    For more information on wireless connections and related illustrations, please refer to Device Pairing.