Preparation

Caution

• Ensure the lens is free of scratches or damages.
• Ensure the device is connected and powered on.
• Ensure a secure joint of the tracker with the tripod and make them stable.
• Do not touch the lens with your fingers lest fingerprints be left to affect data acquisition.

Note

• Make sure the object to be scanned is in the tracker's field of view.
• Do not cover, touch or damage the balls on the scanner when it is working.
• Do not move the object and the tracker during scanning when scanning in Trak Mode > TE Nova.

Note

When scanning in Trak Mode > UE Nova / TE Nova > Scan Mesh or in Laser Mode:

• Need to place markers on the objects.
• Place the markers evenly and randomly.
• Do not use damaged or incomplete markers.
• Do not use greasy, dusty, or dirty markers.
• Do not attach the markers to a surface with high curvature.
• If the device fails to capture markers, it will not emit laser lines.
• Four markers are required for the alignment of common areas.
• Ensure that the device's camera can scan at least 3 markers within the normal scanning range.
• Please attach markers, whose diameter is smaller than 6 mm, to the edges or small areas of the model.

Col

Markers are attached correctly

Col

Artificial grouping of markers

Col

Place the markers in a straight line