Connection

Please follow the instructions below to select wireless or wired method to connect the device.

Wired Connection

Introduction to the Hub

Front PortsBack Ports

No.	Name	Description
①	Network Port	To connect the tracker and the computer to transmit data.
②	Auxillary Power Input	To connect the power adapter. It is only available when an extended tracker is used.
③	System Power Input	To connect the power adapter. It is a main power input of the system.

No.	Name	Description
①	Power Output	To power on the extended tracker.
②	Power Output	To power on the tracker.
③	Network Port	To transmit data of the extended tracker.
④	Network Port	To transmit data of the tracker.

Connection Steps

1. (Optional) Install the tracker on the tripod and tighten the bolts.
2. Insert the power plug and data cable plug into the bottom socket of the tracker.
3. Insert the power plug and data cable plug of the tracker into the hub.
4. Connect one end of the network cable to the hub and the other end to the computer's network port.
5. Connect the power cable to the power adapter to power on the device; the device will automatically boot up after being powered on.
6. Insert the dongle into the computer.
7. After launching the software, check the device connection status.

Wireless Connection

1. Connect your computer and router using a network cable.

   

2. Power on the router.

3. Install the corresponding batteries into the tracker.
4. Press the power button.
5. Insert the dongle into the computer.
6. After launching the software, check the device connection status.

Note

For more information on wireless connections and related illustrations, please refer to Device Pairing.