AI Feature Recognition

This mode is suitable for scanning circles, grooves and rectangles of sheet metal stamping parts. After scanning, you can save models with these features and import them into the third-party software for further measurement.

Note

This mode is only supported in Trak Mode.

Steps

1. After completing Scan Mesh, switch the scan mode to AI Feature Recognition.

   Note

   • When scanning black or reflective objects, switch the scanning object to Black & Reflective mode in the scanning settings on the left side of the scanning interface.
   • You can observe the brightness of the left and right cameras from the camera window in the scanning interface and adjust the brightness to ensure the scanning results are optimal. Double-clicking the camera window to zoom in or out; drag the window to move it.

2. Hold the scanner within the field of view of the tracker and press the device's scan button or click to start scanning the corresponding holes; at this time, the recognized features will automatically appear on the scanned data in the 3D scene, and the corresponding features will also appear in the project list on the left side of the interface.

   Note

   Col

   If the scanned features are yellow, it means that the quality of the scanned data is not ideal. Please continue scanning until the features turns green.

   Col

   

3. Press the pause button on the scanner or click to pause the scan.

4. Check the scanned features in the 3D scene.
5. (Optional) Delete the extra features in the project list.

6. After scanning, click to perform data optimization.

7. Click Save Your Scan in the function bar on the right. You can then import this type of project file into the third-party software for measurement. If you want to save a separate feature file, select the corresponding feature in the project list, right-click, and select Save to save a single feature file.

Note

It is supported to save feature files in .stp, .csv, .txt, .igs, and .asc formats.