Skip to content

Running

If you are using the device for the first time, after launching the software and logging in, it will automatically go to the calibration interface. You need to complete the calibration before using the device properly. Once the calibration is done, the next time you enter the software, it will skip this step and go to the scan mode interface. You can choose the appropriate mode for scanning based on your actual application scenario.

Note

  • If the software takes a long time to start after running, you can open Windows Security Center > App and Browser Control after closing the software, disable SmartScreen for apps and files, and then restart the software.

  • Please make sure to reserve at least 15 GB of storage space on the system drive and the software installation drive before running the software.

Interface

Caution

Check the device connection when appears in the upper left corner and then click to reconnect the device.

① Navigation Bar

Button Description
Device To display the device status: Online / Offline. Device online: To show the device name.
Device offline: Click to reconnect the device.
Calibration Click on the corresponding position in the navigation bar to start calibration.
Scan Mode Click on the corresponding position in the navigation bar to switch to the scan mode interface. There are different modes you can select.
Scan Click on the corresponding position in the navigation bar to start scanning.
Post-Processing Click or after scanning, it will go into the Post-Processing interface where you can do mesh and mesh editing.
You can also click on the corresponding position in the navigation bar to switch to the Post-Processing interface.
Measurement Click on the corresponding position in the navigation bar to switch to the measure interface where you can measure your model.

② Settings and Help

Reverse Engineering Service: If you encounter any problems, please send us the project files and specific information so that we can assist you with your projects.

Option
Description
Official Website Open our official website to learn about the company's products and information.
Facebook Check the Facebook account and get latest information.

General Settings

  • Select Language: To set the language of the software.

  • Preview: To preview the scanning effect before scanning when enabled.

  • Scan Global Markers: You can select Video-Stream Scan or Single-Shot Scan before using Trak Mode. For specific scanning operations, please refer to Scan Global Markers and Photogrammetry.

  • Shape Detection Optimization: To improve the accuracy of sphere diameter at the cost of some details of the scanned data.

  • Scanner Tone: To turn on or turn off the scanner's beep.

  • Detecting Scanner Frame: After enabling it, the tracker will automatically filter out the scanner's markers that are recognized within the tracker's field of view.

  • Probe Mode: Select the third-party software for using the probe.

  • Factory Default: Click Recover to restore the software to its factory settings.

Laser Mode

  • Scanning Distance Indication Method: There are two methods to indicate the scanning distance.
    During scanning, you can adjust the scanning distance according to the color indication.
    Blue: The scanning distance is too far.
    Green: The scanning distance is proper.
    Red: The scanning distance is too close.

Col

Laser Line Indicator

Col

Scanning Distance Indicator

  • The Laser Line Closes Intelligently: Not to project laser lines when not enough markers are recognized.

3rd-Party

Check the third-party software to be called up and select the calling path. Only the checked third-party software will be displayed in the third-party software list of the Photogrammetry, Post-Processing and Measurement interfaces.

  • About: To view related information, software version, etc.
  • System Diagnose: To check if the computer meets the operating conditions. If all items show , it indicates that the configuration meets the operation requirements. If not, please resolve the problem according to the prompts in the interface. Click Refresh to diagnose the system again.

  • Support: You can open the user manual, get remote assistance and check contact information of technical support here.

    Note

    If the software displays a pop-up stating "No TeamViewer detected" when you use remote assistance, you can click Select Path in the dialog box and choose TeamViewer's .exe file to manually update the launch path for TeamViewer.