Skip to content

Calibration notice

You can re-adjust parameters of the device through calibration, which not only ensures the accuracy of the device, but also improves the scanning quality.
Please read the following instructions carefully before calibration.

Calibration is required under the following conditions:

  • The scanner is used for the first time.

  • The scanner has been used for a period of time (e.g. 2 weeks).

  • The scanner is accidentally dropped.

  • The scanner is severely shaken or vibrated during transportation.

  • The accuracy drops during scanning, such as frequent alignment failures.

Caution

● Do not touch the front side of the calibration plate and keep it clean and free from scratches lest it be damaged.

● Keep the calibration plate away from corrosives, metals and sharp objects to avoid corrosion or damage.

● Do not place heavy objects or sundries on the calibration plate.

● Do not wipe the front side of the calibration plate with chemical liquid.

● After using the calibration plate, put it in the flannel bag.

Note

Before calibration, make sure the device is connected successfully and the scanner indicator shines green.