Smile face scanning

It takes at least two stages to scan the face: smile face scanning and face alignment.

Note

When you enter the interface, it will prompt you to take off the glasses, tie up hair and keep a toothy(6-8 teeth) smile.

Steps

1.Adjust the face position.

● Place the scanner about 500mm away from the face and the distance indicator will show "Suitable".

● Center you face in the recognition frame until it turns green.

Note

When you launch the software and start the first scanning, adjust the face to a proper position and the software will modify the parameters automatically.

Correct	Wrong

2.Choose Handheld Mode or Fixed Mode on the lower left.

Note

The window will mirror the scanned face when the scanner is in fixed mode.

● Handheld Mode: The doctor hold the scanner to scan the patient's face across at a constant speed.

● Fixed Mode: Place the scanner on a flat surface with the lens level with the patient's face. The patient then turns his/her head at a constant speed from side to side.

3.Click and start scanning; or hold the position, and the scanning will start after a 3 seconds countdown. You can also press space bar to start.

Icon	Description
	To start scanning.
	To delete the data and re-scan the face.
	To save the data.

4.Click to finish scanning and save the data.