Read This First¶
The Manual provides important procedures and information on how to operate the scanner and configure the IntraoralScan software correctly and safely. Before attempting to operate the product, read the Manual and strictly observe all warnings and cautions. Pay extra attention to the information from Safety information.
Basic Information¶
I. Product name, model
| Classification | Detail |
|---|---|
| Product Name | Intraoral scanner |
| Model | Aoralscan 3 Wireless |
II. Name, residence, contact information and after-sales service of the manufacturer
| Classification | Detail |
|---|---|
| Manufacturer name | Shining 3D Tech Co., Ltd. |
| Production Address | No. 1398, Xiangbin Road, Wenyan, Xiaoshan, Hangzhou, Zhejiang, China, 311258 |
Caution¶
● Do not attempt to disassemble, repair, or modify the scanner and software.
● There are no user serviceable parts inside the scanner. Necessary modifications must be made only by the manufacturer or its designated agents.
● Do not allow foreign objects (including all types of liquids) to enter the scanner and its cradle. Water, moisture, etc. may cause a short circuit in the electronic components and lead to malfunction.
● If the scanner tip is accidentally dropped to the ground, check to make sure the mirror is not loose before using it.
● If the scanner is inadvertently dropped on the ground or impacted, it must be calibrated before use. If there are still accuracy problems or scanning abnormalities after calibration, please consult technical support.
● Do not drop or apply shock/vibration to this scanner and its cradle. Strong impacts may damage the components inside.
● Do not cut, bend, modify, place heavy objects, or step on the cables. Otherwise, the external insulation may be damaged and result in short- circuit or fire.
● To avoid electrical shock, use only supplied power adapter and connect it only to properly grounded wall outlets.
● The device should not be used adjacent to or stacked with other equipment. If adjacent or stacked use is necessary, the device should be observed to verify normal operation in the configuration in which it will be used.