Oral Health Report¶

Create an oral report¶

Steps

1 On the pre-design interface, click .

2 Select a hospital, a target (Adult/ Child) and a template type.

3 Click Accept to edit the oral report.

Note

● When enabling assistant mode, the software will start assistant identification automatically before editing the oral report.

● Assistant Mode is only accessible when the target is adult.

Edit the oral report¶

1 When enabling assistant mode, click Accept to enter the main interface to edit the oral report.

2 The main interface displays the bite status of the jaws. Click the picture of a symptom and the model will show the position of the symptom.

Note

● Import an order which was created in the software with lower versions and click oral report, and then a tip is popped up to confirm whether to generate a new report. Click Yes to clear operations and enter the interface of editing a new report. Click No to preview the report.

● Assistant mode is not enabled for preview-only reports.

Assistant ModeMain Interface of Oral Report

A tip of Abnormal data not identified yet is popped up when the software can't identify diseases. Otherwise, the identification results are shown in the Issue window.

The results are watermarked with AI. Click the picture to zoom it in.

Operation	Description
Show description /Show notes and plan	Check to show the description, notes and plan of the symptoms.
Select best (all)	Check to select the first one of the symptoms.
Reset option	Click and a tip of "Whether to clear all operations?" is popped up. Click Yes to delete all selections and notes.
Hide this symptom	Check to hide this kind of symptom.
Accept	Save all the selections and enter the interface of editing oral report.
Select teeth	Click to select the tooth of the symptom.
Delete	Click to delete the certain symptom.

Select no symptom and click Accept, then a tip of “Symptom select incompleted, whether to nex step?” is popped up. Click Yes and unselected symptoms are deleted.

Note

Selected symptoms are displayed in the main interface of oral report, while the unselected symptoms are completely deleted.

Icon	Description
One-click filling	Click to set descriptions and plans in issue view.
Delete	Click and a tip of "Whether to delete all issues?" is popped up. Click Yes to confirm.
Preview	Preview the oral health report. Share: Create a QR code which can be scanned by the phone to view the report. Export: The report will be exported in PDF and PNG.
Assistant Mode	Assistant Mode will automatically detect teeth problems and take screenshots of certain teeth. Click the button when there are already identifications, a prompt of "Whether to perform auxiliary identification again?" is popped up. Click Yes to restart auxiliary identification and current results are deleted.
Endoscope	Take a screenshot of the model. Click and the enlarged image window is displayed on the left. Scan the teeth. Press scanning button on the scanner or click on the image window to take a screenshot. Select the treated tooth and problems in the new pop-up. Adding notes is also supported. Click to take more screenshots.
CT Image	Add an image and edit it. Treatment plan and other information of the treated teeth can be imported. Change image: Click to change the image. Mark: Click the treated tooth to mark it with different colors and enter relative information. Plan: Click plan and a box is displayed. You can enter your treatment plan here. Brush: Click to paint directly on the image. Drag the slider to adjust its thickness. Eraser: Clear the marks in the model. : Multi-click for undoing multi-operations. : Multi-click for redoing multi-operations. : Discard the changes. : Confirm and save the changes.
Grab image	Take a screenshot of the scanned model. Click the button of screenshot and an enlarged screenshot box is displayed. Press left mouse button within the black box and move the cursor to rotate the model. ● Press right mouse button outside the box and move the cursor to rotate the model. ● Press right and left mouse button outside the box and move the cursor to move the model. ● Scroll the wheel to zoom the model in and out. Double click in the box to confirm and select the treated tooth and problems in the new pop-up. Adding notes is also supported. Click to take more screenshots.
IR grab	Take a screenshot of the near-infrared image. Note If the order has activated the near-infrared image, the IR grab function can be displayed. Click the button and an enlarged screenshot box is displayed. Click to adjust brightness and contrast. Press left mouse button within the black box and move the cursor to rotate the model. ● Press right mouse button outside the box and move the cursor to rotate the model. ● Press right and left mouse button outside the box and move the cursor to move the model. ● Scroll the wheel to zoom the model in and out. Double click in the box to confirm and select the treated tooth and problems in the new pop-up.
Graffiti Mode	Display models in various angles including close jaw, open jaw and CT.
Trash Station	Deleted symptoms are collected in the trash station. Click the Restore button on the top right corner of the picture to restore it. Click the trash station button again or click Exit on the top right corner to exit.
Exit	Click to exit the oral report.

Other functions¶

Name	Description
3D label	Not enabled by default. When it's enabled, symptoms under this perspective will be tagged. Click the tag and the picture of this symptom will be selected on the right. Modifying notes, descriptions and plans, selecting tooth and deleting this symptom are supported. Note When the jaws are open, the 3D tags are hidden if the software can't determine whether the symptoms are on upper jaw or lower jaw.
Opened jaw	Not enabled by default. When it's enabled, the model is displayed in open jaw.
Direction flag	Not enabled by default. When it's enabled, an indicator avatar will be displayed in the bottom left corner. The indicator avatar will change synchronously as the model is moved, providing users with a more intuitive view of the model.
Graffiti mode	Not enabled by default. When it's enabled, the cursor turns into brush. Press the left mouse button and move the cursor to draw on the model. Press left mouse button and move the cursor to rotate the model.