Skip to content

Import the Model

Enter the Welcome to AccuDesign! interface, where you can choose to Create new project or Import project.

Create a New Project

Click Create new project, import model files (in the format of STL、PLY、OBJ or BEB) locally and select Base, Articulator and Text.

  • Click Upper Jaw or Lower Jaw import frame to import models.
  • The imported model is displayed in the default occlusal view. You can perform operations such as translation, rotation, and scaling on the model (as shown in the table below). In addition, you can click the button to delete the model or click the button to reset the model to its initial state.

Order Shortcuts
Move Move the curser while hold down the left and right mouse buttons
Rotate Move the curser while hold down the right mouse button
Scale Rotate the wheel up or down

Note

  • If the software is called from scanning softwares, then manual import or deletion of models is not supported; only 3D preview is available.
  • It supports importing non-segmented models, which means it can import data for a single upper jaw model, a single lower jaw model, or a model including both upper and lower jaws.
  • It is recommended to import the correct upper jaw and lower models that match the diagram information within the specified frame, otherwise it may affect the automatic generation of the model.

Support two base options, namely Default (the default option) and Orthodontic ABO, the description of two options is shown in the table below.

Base type Commons Differences
Default base
The base is a bottom mesh and has drainage holes, and its default thickness is 2mm		 Pull the base directly downward from the model edge to extend it. The default height of the base is 3 mm
Orthodontic ABO The default height of the base is 13 mm. A matching dental arch for the base is added, with a basal angle of 70°

Support mutiple articulator options (the default option is Empty): large/medium/small articulator, articulator for quadrant models, etc.

Note

Articulator options can not be applied when only one model is imported.

Support customizing Text Content and Text Position (Left, Middle, Right).

Note

  • The maximum chapter limit is 100.
  • Click to preview the position of the text.

Click Auto generation, and wait for the software to automatically design and generate the digital model.

Note

  • When the interface displays "Processing, please wait...", please wait until the interface finishes loading.
  • If a popup window appears with the message "Generation failed, please readjust!", please follow the guidance on the right side of the interface for adjustments:
  • If the automatic alignment of the model fails, then you will be automatically navigated to Coord adjust.
  • If the recognition of the model area or shell extraction of the base fails, then you will be automatically navigated to Area adjustment.
  • If the addition of customized text or artiulator fails, then you will be automatically navigated to lease proceed to Attachment adjustment.

Import a Project

Click Import project, import project files (in the format of ACCUDESIGNPROJECT) locally.

  1. Click Import project will pop up a Import project dialog box.

  2. Double click a project file in the dialog box, or click to choose a project file and click Open button to import the project.

Note

If the imported project has not yet proceeded with all steps, then you will be automatically navigated to the unfinished steps; or you will be automatically navigated to Printing view.