Unpack the Package¶
Check the carry box for the following items. If any item is missing or damaged, contact the distributor or service provider immediately.
Note
The following figures in the parts list are for reference only, the actual product shall prevail if there is any inconsistency.
| No. | Introduction | Quantity |
|---|---|---|
| 1 | Scanner | 1 |
| 2 | Scanner Tips (4 standard tips and 1 mini tip) | 5 |
| 3 | Dust Cap | 1 |
| 4 | Scanner Cradle | 1 |
| 5 | Power Adapter (input: 100-240 V, 50-60 Hz, 1.0 A; output: 12 V DC, 3 A; power cord length: 1.5 m) | 1 |
| 6 | USB 3.0 Cable (1.5m). Use it together with the calibrator. | 1 |
| 7 | Calibrator | 1 |
| 8 | USB Flash Drive (the software carrier) | 1 |
| 9 | USB 3.0 Repeater (1.0m) | 1 |
| 10 | Package Box | 1 |
Caution
-
AC plug types vary by country/region.
-
Using accessories, peripherals, or cables not supplied with the product or recommended by Shining 3D can affect the device in the form of increased emissions or decreased immunity to external EMI/EMC occurrences. Non-specified peripherals, and cables in some cases, can also increase leakage current or compromise the safety of the grounding scheme.
-
Using accessories or power supply units other than those specified may cause the warranty to void and result in increased emissions, decreased EMI immunity of the device, or even damages to the device and personal injuries.
-
Place the USB flash drive in a safe place for later usage.
-
We recommend that you keep all the original packaging components in a safe place in case you need to transport or dispose of the scanner in the future. More details see Care and Maintenance.