Scan Interface Introduction¶
Function preview¶
① Camera Window¶
Displays the real scanning scenarios and supports to set camera parameters.
Move the mouse within the image window to adjust the camera parameters.
| Icon | Description | Icon | Description |
|---|---|---|---|
 Endoscope |
Click to enlarge the image window, and click again to restore it to the default size. |  Screenshot |
Take a screenshot of the current image in the image window, and save the image in the "EndoscopeImg" folder under the current order directory. |
 Mask |
Scanning indication switch. Disabled by default. When turned on, the camera window displays the current unscanned data area in purple when scanning. |  Find screenshot |
After taking screenshots, click it to open the path of saved screenshot. |
② Guide¶
Contains the current process, operating diagrams and detailed tips.
③ Intraoral scan/Edentulous scan¶
- Intraoral scan: Checked by default, applicable to intraoral scanning. It is recommended to leave this checkbox unchecked when scanning dental models.
- Edentulous scan: It can be checked after checking Intraoral scan. If it is checked, scanning process for edentulous patients will be speeded up.
④ Progress Bar¶
Displays the current position within the whole progress.
To view the other processes, click •••.
To add extra processes, click ✚.
The progress bar includes upper jaw, lower jaw, bite, additional scan and so on.
Additional scan¶
Additional scanning is used for scanning groups of additional models for extra information.
-
: Click to add additional scan. -
: Click to rename the additional scanned model. -
: Click to delete the additional scan.
Note
-
When adding another group of additional scan, the user should finish the former one.
-
The disk memory must be at least 25 GB when adding additional scan.
⑤ Preview¶
Supports previewing the scanned data. To gain a comprehensive view to the model, details can be found in Operation Skill.
⑥ Operations¶
Including scan operations.
| Icon | Description | Icon | Description |
|---|---|---|---|
 Manual align |
Manually align the extra-matched data with the main data. |  Impression scan |
Combine the impression scan with the main data. During this scanning process, user can edit the data, remove the isolated data and so on. |
 / Start/Pause |
Click to start or pause the scanning. |  Reset |
Reset current scanning data. |
 Finish |
Finish scanning and save the current scanning data. |
⑦ Scan frames and time¶
Show the number of scanned frames, scan and data processing time and the scanner status.
| Icon | Description | Icon | Description |
|---|---|---|---|
 |
Connected. |  |
Connecting. |
 |
Wrong connection. |  |
In sleeping mode. |
 |
Heating. |  |
In standby mode. |
⑧ Extra match¶
Extra-match can align the scanned data with third-party accessories for checking multiple sets of data.
More details can be found in Extra match.
⑨ Tools and additional functions¶
Tools and additional functions can be used for better scanning and previewing the model. More details can be found in Scanning tools and Additional functions.
on the navigation bar. |
| 2 | **Other operation** | 
：View users information and Connection.
：Process accuracy calibration and lightness. Details in [Calibration](calibration.md).
: To record the screen, take a screenshot and check screenshots. 
：Parameters of orders, scanning process and pre-design. Details in [Setting Order](settingorder.md).
：Click for remote assistance, online consultant, the Manual and other instructions. |
| 3 | **Camera Window** | Displays the real scanning scenarios and supports setting scanning Parameters.
: Edit current model. Details in [Data Edit](dataedit.md). 
: Delete smaller and isolated model data that are not connected to the main model. Help delete unrelated model data quickly.
: The area will display more partial details in a higher resolution grid during the post-op process. This feature is best used with Tooth Color function to ensure that the quality of the tooth color is true in the refined area. Select **Refined Scan** in the **Settings ->Scanning Settings** to automatically enter the process of refined area selection when the upper/lower jaw scanning is completed.
: When the scan is paused during the scanning process of pre-op or upper/lower jaw, click **Part Lock** to set the scanning lock area to ensure the data in the locked area will note change in subsequent scanning. 
: It is used to check and calculate the undercut area on the marked teeth (in accordance with the order). During the scanning process of upper/lower jaw, pause the scanning and click **Undercut**. The area selected by the brush will be calculated automatically. Details see [Undercut](undercut.md).
: Switch data of upper and lower jaw after the scan is completed or post-processing is completed. For cases where the upper and lower jaw flow is reversed during scanning. 
: Import the standard teeth data.|
| 11 | **Additional Function** | 
: **Texture switch**. Set whether the model shows colored model or not. 
: **Tooth color switch**. Turn on the tooth color display. If the gray color is displayed when scanning, it means the data quality in these area is not good enough, and the area should be scanned again. When the grey color turns into true color display, it means the data quality has reached the requirements of better post-processing. 
: **AI Optimize**, applied to intraoral scanning. After clicking it, miscellaneous data will be automatically deleted when scanning, such as data of buccal, lingual and soft tissues. When you use the software for the first time and enter the scanning interface, the button is gray and you need to wait for 1-2 minutes for initialization. After the initialization is completed, the button can be clicked. 
: When you click **View Lock**, you will check the model from one fixed perspective when scanning, and the automatic perspective tracking function is not enabled. This function is not enabled by default. 
: **Metal Tooth Scan** will improve the scanning speed and sweep the whole situation for metal teeth.
|
| 12 | **Operation** | **Scan**
: Preview the scanned model.