Skip to content

Projects Alignment

If there are multiple projects in a project group, you need to align the data after scanning.

Click in the right-side function bar of the Scan step interface and start projects alignment.

In the Alignment Panel, four alignment modes are provided:

Mode
Description
Note

Auto Feature Alignment
  1. Choose Auto Feature Alignment.
  2. Select the project which needs alignment in the fixed window and the floated window.
  3. Click Apply to align.
Objects with repeated features, like a round or a ring, or that with small size are not suitable for this mode.

Manual Feature Alignment
  1. Choose Manual Feature Alignment.
  2. Manually choose at least 3 common points on the data in the fixed window and the floated window respectively.
  3. Click Apply to align.
The chosen points should not in a line.

By Markers
  1. Choose By Markers.
  2. Select the project which needs alignment in the fixed window and the floated window.
  3. Click Apply to align.
There are no less than 3 common markers in each project.

By Manual Markers
  1. Choose By Manual Markers.
  2. Manually choose at least 3 common points on the data in the fixed window and the floated window respectively.
  3. Click Apply to align.
The chosen markers should not be in a line.

Note

  • Manual alignment serves as an alternative method of auto alignment, especially when automatic alignment fails, manual alignment can be selected.
  • You can check Add to Group, and the selected project or group in the floated window will be automatically merged into the fixed window.