Skip to content

Start Scanning

After adjusting scanning settings, you can proceed with scanning the objects.

Note

  • Before starting the scan, please check the preview effect in the camera window to confirm whether the placement of the object to be scanned is appropriate:
    If the Laser projection function is enabled, you will see the laser points in the camera window, then you can determine if the distance is appropriate by checking whether the two projected laser points overlap;
    If you disable this function, you can also check the black cross projected onto the object in the camera window (displayed after enabling > Cross Laser function) to adjust the placement of the object until the black cross is clearly visible.
  • It is recommended that you enable the Stability Check function in Settings > Fixed Scan Settings, then it can monitor the scanner's stability in real time and give prompts to adjust.
  • After entering the scanning process, the software wll automatically determine whether to heat the engine based on the current temperature; it is recommended that you wait until the device reaches the preset temperature before performing the scan to ensure its scanning accuracy.

Switch Scanning Status

You can switch the scanning status by clicking the buttons in the right side bar.

For the project with large volume of point cloud data, you can manually adjust the display ratio using the Sampling Display function in the context menu; additionally, if the project does not have high accuracy requirements, you can also reduce the sampling resolution.

Icon Function
Description
Scan Scanned data will be stored.
Note
  • When scanning, please ensure that the laser covers the object to be scanned.
  • Press Space or the > button on the remote to start scanning.
Pause After starting scanning, click this button to pause the scanning.
Stop & Delete When scanning with the turntable, click this button to end the current scanning and delete the scanned data.

Note

  • If markers have been placed but no data can be collected, please check the condition of the placed markers (there should be at least 4 markers within each scanning area, and at least 4 common markers between adjacent scanning areas) or switch the align mode.
  • If there is already a large amount of scanning data in the current project, the software will pop up a window to prompt you to sample the display of the data.

Global Optimization

When you finish the scan, click Global Optimization in the right-side function bar to optimize and align the data, and generate the point cloud.

Support setting optimization mode in Settings > Fixed Scan Settings:

  • Global Optimization (default): Perform global optimization of markers and point cloud to improve the quality of the generated point cloud data.
  • Use Markers Only: Only perform markers optimization, please ensure that there are at least 4 markers within each scanning area, and at least 4 common markers between adjacent scanning areas.
  • Point Cloud: Only perform point cloud optimization.

Click to confirm the global optimization, and proceed with project alignment or model mesh; and you can also click to exit the current interface and continue scanning or re-optimize.

Note

  • You can edit the scanned data before global optimization.
  • The larger the amount of scan data is and the lower the computer configuration is, the longer the global optimization will take.